TCS WOW501-Steam ~ For Large Scale WOWSound With Keep Alive ~ 5 Amp ~ 1600

Description

Iron Planet Hobbies
TCS WOW501-Steam ~ For Large Scale WOWSound With Keep Alive ~ 5 Amp ~ 1600
The WOW501 is a universal, 5 Amp sound decoder for large-scale locomotives. The WOW501 includes Keep Alive® on-board for stutter-free operation. Function 5 and 6 may be programmed to control a smoke unit with a coil and fan. By programming CV58 with a value of 9, the smoke unit will react to the prime mover notch.
For a complete list of available sounds, check out the "Sounds List" under the "Documents" tab.
CD-Quality Sound:
TCS' world-renowned CD-quality sound. 16 Bits of resolution at 44.1kHz sample rate.
Keep-Alive®:
Included on-board for smooth, stutter-free operation.
Back EMF Load Compensation:
Provides superior slow speed control and high performance under load.
Quiet Drive:
Super-quiet motor control for "buzz" free motor performance.
Variable Momentum:
Allows you to make custom acceleration and deceleration curves.
Incandescent Bulb Support:
This decoder can be used with 12 Volt bulbs.
Function Remapping:
Buttons 0 through 12 may be used to control the lighting functions of this decoder.
Programmable Lighting Effects:
Choose from 20 separate user-programmable lighting effects!
Dimmable Brightness:
Configure multiple different brightness levels for your LED's or incandescent bulbs.
Decoder Lock:
Feature which prevents accidental/unwanted programming while activated.
Airwireâ„¢ Compatible:
Fully compatible with Airwireâ„¢ operation.
Audio Assist®:
TCS exclusive auditory feedback programming system. Program your decoder without the need to memorize CV's!
User-Loadable Speed Tables:
Configure custom speed curves and set speed limits.
Throttle Modes:
Choose from multiple throttle modes to meet your operating needs.
Proto Notchâ„¢:
A WOWSound original feature which uses TCS’ exclusive auto-adjusting BEMF technology to automatically choose the active notch sound. Prototype Mode also offers dynamic sound volumes which accurately model the real-life equivalent. Also includes pre-programmed acceleration and deceleration values.
Specs:
Interface Type:
Hard-Wire
Dimensions (L x W x H): 3.004" x 1.413" x 0.551" or 76.3mm x 35.9mm x 14mm
Scale: O Scale G Scale S Scale
Continuous/Peak: 5/10 Amp
Total Functions: 8
Function Rating: 1A
12V Outputs:
8
Speaker Selection
This decoder is optimized for 8 Ω speakers (not included).
This decoder uses and audio amplifier capable of supplying up to 2 Watts of power to an 8 Ohm load at maximum volume. An 8 Ohm speaker with a 1 Watt minimum power rating is recommended for use with this decoder as it comes out of the package. If you are using an 8 Ohm speaker with a power rating of 2 Watts or less, you must reduce your master volume to prevent speaker failure or amplifier stress.
The amplifier(s) on a WOWSound product can support speakers with impedance ratings as low as 4 Ohms. A reduction in impedance will require a higher power dissipation rating (more Watts) on said speaker. The minimum power requirement for a 4 Ohm speaker is 4 Watts. If you are using a 4 Ohm speaker with a power rating of 4 Watts or less, you must reduce your master volume to prevent speaker failure or amplifier stress.
Speaker enclosures greatly increase speaker performance in most cases - improving the apparent volume by more efficiently directing the flow of air and reducing or eliminating destructive interference.
We are an authorized TCS dealer
.
Thanks For Looking!